Emerson Process Management ROSEMOUNT 5300 Instrukcja Użytkownika Pobierz pdf (Strona 54)

100

101

Reference Manual

00809-0100-4530, Rev BA

July 2009

Rosemount 5300 Series

3-24

Solid Applications

Pull the probe rope through a

suitable anchoring point, e.g. a

welded eye and fasten it with two

clamps. It is recommended that the

probe is slack in order to prevent

high tensile loads.

The sag should be at least

1.5 in./10 ft (1 cm/m) of the probe

length.

Alternative chuck for Flexible

Single Lead probes

Loosen the screws. Pull the probe

rope through a suitable anchoring

point, e.g. a welded eye.

Tighten the screws. The required

torque and hex key dimensions:

4 mm wire: 15 Nm, 4 mm

6 mm wire: 25 Nm, 5 mm

 1cm/m

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 323 324

Komentarze do niniejszej Instrukcji

Brak uwag

Emerson Process Management ROSEMOUNT 5300 Instrukcja Użytkownika Strona 54

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Emerson Process Management ROSEMOUNT 5300