Emerson Process Management ROSEMOUNT 5300 Instrukcja Użytkownika Pobierz pdf (Strona 272)

Reference Manual

00809-0100-4530, Rev BA

July 2009

Rosemount 5300 Series

D-2

M6 screw

Fasten the housing support to the bracket

using the M6 screws. The screws are

threaded through the top of the mounting

bracket and into the housing support.

M50 nut

Mount the probe housing on the probe

Mount the probe housing on the probe,

making sure that the M50 nut is properly

tightened.

Connect the transmitter head on the

housing support

Connect the transmitter head on the housing

support, making sure that the M50 nut is

properly tightened.

See “Remote Housing Configuration” on

page D-4 to check if the transmitter is

configured with remote housing.

Mount the bracket to the pole

Mount the bracket to the pole, making sure the

distance between the probe and bracket does

not exceed the length of the remote connection.

1. Put the two U-bolts through the holes of

the bracket. Several holes are available for

vertical/horizontal pipe mounting.

2. Put the clamping brackets on the U-bolts

and around the pipe.

3. Use the supplied nuts to fasten the bracket

to the pipe.

U-bolt

Bracket

Clamping Brackets

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 323 324

Brak uwag

Emerson Process Management ROSEMOUNT 5300 Instrukcja Użytkownika Strona 272